Model | Accuracy (%) |
Weighing range (t/h) |
Belt speed (m/s) |
Adaptive belt width (mm) |
Belt conveyor inclination | Load cell (PC) |
Weighing roller |
ICS-XE(14A) | ±0.125 | 5-3000 | 0.2-4 | 500-2400 | ≤6 | 4 | 4 |
ICS-ST4(17A) | ±0.25 | 5-3000 | 0.2-4 | 500-2400 | ≤18 | 2 | 4 |
ICS-ST4(17B) | ±0.25 | 5-3000 | 0.2-4 | 500-2000 | ≤18 | 2 | 2 |
ICS-ST2(20A) | ±0.5 | 1-2000 | 0.2-4 | 500-1400 | ≤18 | 1 | 2 |
ICS-ST2(20B) | ±0.5 | 1-2000 | 0.2-4 | 500-1400 | ≤18 | 1 | 1 |
ICS-DT(30A) | ±0.5 | 1-2000 | 0.2-4 | 500-1400 | ≤18 | 2 |
1. Modular design, good versatility. The modular belt scale is a weigh module that pre-assembles a load cell and force transfer mechanism. The field roller is reinstalled into the field weighing roller and connected to the weigh module to form a weigh bridge. Since there are no limitations of traditional weighing trays, the choice of belt scale is almost unlimited by the conveyor bandwidth, as long as the right range of weigh modules is selected.
2. The modular belt scale eliminates the need for traditional bridges, expanding the range of sensor applications.
3. Convenient use for production. Since the four components of the belt scale are equipped with general equipment, the manufacturer can stock up for mass production, which greatly shortens the production cycle
4. Convenient transportation. Since there is no quadrilateral weighbridge, the transport weight and volume are greatly reduced, which facilitates the long-distance transportation of the equipment.
5. Easy to install. There is no heavy bridge, no need to use large lifting equipment for installation, and one or two people can complete the installation on site, which greatly shortens the installation cycle and reduces the installation cost
6.Easy to maintain. Since there is no lever pivot point and no movable parts, there are problems such as fulcrum wear. Leverless scale frame, large scale body, zero point change caused by surface dust.
7. Improve accuracy. Since the weigh module is pre-installed in the factory, the load cell is not directly connected to the structural parts, the sensor force is greatly improved, the structural stress and installation accuracy are affected little, and the belt scale is improved. In addition, since there is no weighing bridge, the tare weight of the sensor becomes smaller, and the effective use of the scope of use of the load cell also improves the accuracy of the belt scale.